Refinish a Patio Bar Tables and Chairs
Bar tables and chairs – Whether you want to refinish your patio table and chairs by staining or painting them, you need to understand the importance of proper surface treatment, or you are likely to end up with a disappointing finish. If you plan to paint your furniture, you need to condition the surface to promote paint adhesion, or you will eventually end up with chipping and peeling. If you want to dye your furniture, you must remove any old paint that may disturb the furniture to absorb the stain.
Refinish a patio bar tables and chairs and refinish with stain, clean the patio table and chairs with detergent and a coarse plastic brush. Rinse the furniture with a water hose. Allow the surface to dry out completely before proceeding. Sand outside the shiny top coat of lacquer by means of a palm sander loaded with 200-grit sandpaper. Wipe the table and chairs with a tack cloth.
After that to refinish a patio bar tables and chairs, protect any parts of the tables and chairs you want left unstained by covering them with masking tape. Cover the floor beneath the furniture with plastic drop cloths. Place the fabric drapes on top of the plastic ones. Apply a thin layer of paint using a two- to four-inch oil-based paintbrush. Let the stain dry for two hours, and then apply an extra coat for a darker surface. Let the final coat of paint to dry for four hours. Wash oily brush with white spirit. Apply two light coats of oil-based paint using a brush. Allow two hours of drying time between coats.